Free estimates WA GC CASCADF741LJ $30K bond Up to $2M liability coverage
Blog

Do You Need a Permit for a Deck or Fence in Snohomish or King County?

A deck or fence may need a permit, but the answer starts with the property jurisdiction and the exact scope. Seattle, unincorporated King County, unincorporated Snohomish County, and the cities inside those counties do not use one shared threshold. Confirm who regulates the address before relying on a height, size, or permit exemption.

Start with the authority for the property

County names can be misleading in permit research. A Bellevue property is in King County, but the City of Bellevue controls its local building and land use process. An Everett property is in Snohomish County, but the City of Everett is the first permitting authority to check. County permit pages generally apply only to unincorporated land unless the page says otherwise.

Use the project address to answer these questions:

  1. Is the property inside an incorporated city or in unincorporated county land?
  2. Does the parcel include a steep slope, wetland, shoreline, flood area, or another critical-area condition?
  3. Is the project new construction, replacement in kind, a structural repair, or surface-only work?
  4. How high is the deck or fence, and how is that height measured by the local rule?
  5. Will the project include a roof, retaining wall, masonry, electrical work, or a change near a property line?

Quick comparison from official guidance

Seattle

SDCI says a permit is required when a deck is more than 18 inches above the ground, is a roof deck, or is in an environmentally critical area. For fences, SDCI says a permit is generally not required at 8 feet high or lower when masonry or concrete portions do not exceed 6 feet, unless the fence is in a flood-prone area. Other height and location rules still apply. Verify the current guidance on the official Seattle deck page and Seattle fence page.

Unincorporated King County

King County lists uncovered decks 30 inches or less above the ground and fences 6 feet high or less among work that may not need a permit when special site conditions do not apply. Check the county’s current permit guidance for unincorporated property.

Unincorporated Snohomish County

The county’s deck bulletin lists conditions that trigger a permit, including a walking surface more than 30 inches high at a point within 36 inches of the open edge, a deck over a basement or story, certain accessible routes, or a supporting roof cover. Snohomish County also publishes a separate fence bulletin. Verify the current deck bulletin and fence bulletin.

These are examples from the linked public guidance, not a universal rule for every parcel. Official pages and codes can change. Contact the authority when the project is close to a threshold or the property has a special condition.

Seattle uses its own deck and fence rules

Seattle’s deck page gives a lower height threshold than the county examples above. It also calls out roof decks and environmentally critical areas. The same page discusses placement and lot-coverage rules, so a deck can require research even when the construction permit question appears simple.

Seattle’s fence page separates the building permit question from land use limits. A fence that does not need a construction permit still has to follow rules for height, sloping sites, retaining walls, access, and environmentally critical areas. Corner lots and sightlines also deserve attention.

Our Seattle service-area guide links homeowners to the city resources used during early planning. The dedicated Seattle deck builder and Seattle fence contractor pages turn those sources into service-specific estimate questions. The final answer still depends on the address and design.

King County guidance applies to unincorporated property

King County’s permit page lists common examples of work that may be exempt from a permit, including an uncovered deck at or below the stated height and a fence at or below the stated height. The page also flags conditions that can change the result, including critical areas, flood zones, shorelines, steep slopes, wetlands, setbacks, and lot coverage.

If the property is inside Bellevue, Kirkland, Redmond, Mercer Island, or another King County city, use the city’s permit department instead. The Bellevue planning page links to a focused Bellevue deck builder guide and Bellevue fence contractor guide. Kirkland homeowners can compare the Kirkland deck builder guide with the city’s separate fence planning guide. The Redmond deck guide and Mercer Island fence guide also start with their own city sources. None of these pages assumes that one county rule controls every incorporated address.

Snohomish County publishes project bulletins

The Snohomish County deck bulletin explains when a residential deck, porch, or step project on unincorporated property needs a permit. It also lists submittal items such as a base site plan and structural drawings. The bulletin says it does not apply inside incorporated city limits.

The county’s fence bulletin addresses the fence application path and property-line questions. If the property is in Everett, Edmonds, Bothell, or another city, start with that city’s department. Our Everett service-area page and Everett fence contractor guide link to Everett’s own planning and permit resources. Homeowners planning a deck inside Edmonds can use the Edmonds deck builder guide to identify the city documents and site details to bring into an estimate conversation.

Small changes can alter the permit answer

A simple height question rarely captures the whole project. These conditions deserve separate review:

  • Roof covers: A covered deck or porch can follow a different permit path from an uncovered platform.
  • Critical areas: Slopes, wetlands, shorelines, and flood-prone land can trigger additional review.
  • Retaining walls: A fence placed on or near a retaining wall can be measured and regulated differently.
  • Property lines: A permit department does not settle a private boundary dispute. A survey or legal advice may be needed when the line is uncertain.
  • Stairs and guards: A low platform may still include stairs, landings, or guards that need code review.
  • Electrical work: Lighting, receptacles, heaters, or other electrical additions can require a separate permit.
  • Replacement work: Replacing boards is not the same as rebuilding framing, changing the footprint, or replacing a ledger connection.

Plan the scope before applying

Permit research becomes easier when the project is described clearly. A useful starting package includes the property address, a rough site sketch, the proposed footprint, height above grade, distance to property lines, photos of the house connection, and notes about slopes or drainage. For a fence, include the proposed height, gate locations, retaining walls, corner visibility, and the best available property-line information.

If you are planning a new structure, review our custom deck service or privacy fence planning page. Existing structures need a different conversation. The deck repair page explains why the condition of framing and connections matters, while the stairs and railings page covers related safety and layout questions.

Put permit responsibility in the written scope

Before work begins, the written agreement should identify who will prepare documents, submit an application, pay fees, respond to corrections, schedule inspections, and close the permit. Do not rely on a general website statement or verbal assumption. Cascadia’s exact permit coordination must match the signed project scope.

Tell us what you want to build and where the property is. We can discuss the project details that need to be confirmed with the local authority. Request a Free Estimate for a deck or fence project in the Greater Seattle Area.

Contractor review: Cascadia Deck & Fence LLC, WA GC CASCADF741LJ. This article is general planning information, not legal, surveying, engineering, or permit approval advice. The permitting authority decides what applies to a specific property and scope.

Reviews & project updates

Check our work. Stay connected.

Already worked with Cascadia?Your feedback helps local homeowners make a confident choice.
Leave a Google Review
Ready to discuss the project?

Request a free deck or fence estimate.

Call Free Estimate