Free estimates WA GC CASCADF741LJ $30K bond Up to $2M liability coverage
Serving homeowners across Greater Seattle

Seattle Fence Contractor

Confirm the proposed line, setbacks, grade, height, and gate access before selecting the board layout.

Finished residential privacy fence built by Cascadia Deck and Fence
Cascadia at a glance
Up to 4 yearsworkmanship warranty with select packages
10+years combined experience
300+satisfied customers
✓Written project scope✓Material advice for Northwest weather✓Licensed, bonded & insured

Cascadia installs, replaces, and completes selected repairs on residential fences in Seattle. A useful estimate begins with the proposed fence line, grade, height, gate access, nearby streets or alleys, and the best available property information. Board direction comes after those site questions.

Our services include cedar, horizontal, privacy, and metal-post fence options, custom gates, replacement, and selected repairs. Visit the Seattle service-area overview when the project also involves a deck or other yard work.

Separate the permit question from the height limit

The Seattle Department of Construction and Inspections says a construction permit is generally not required for a fence with a total height of 8 feet or less when masonry or concrete elements do not exceed 6 feet. A fence in a flood-prone area can require a permit, and a taller fence needs one.

That permit exemption is not the same as permission to build an 8-foot fence anywhere. SDCI’s current Seattle fence guidance says neighborhood residential and multifamily zones generally limit fences to 6 feet, with limited additional architectural features. It lists a 4-foot limit in front or street-side setbacks.

Confirm the property zone, setback, and exact proposed line before fixing the height. A city map or assessor record can support early research, but a contractor estimate does not settle a legal boundary.

Slopes and retaining walls change the measurement

SDCI publishes a separate approach for sloping sites. It says a fence can reach 8 feet when the average height between posts is 6 feet. A retaining wall can also change the combined height rule, depending on whether it raises or lowers the grade.

Photograph the entire route from both ends. Show the high and low sides, retaining walls, raised planting beds, hardscape, tree roots, drainage paths, and nearby sidewalk or alley. A close photo of one damaged panel cannot show how the top line should move across the yard.

Environmentally critical areas and flood conditions need separate attention. The city decides whether those conditions affect placement, permits, or required drawings.

Plan the gate before the adjoining panels

A gate needs enough width for its actual use, a sensible swing direction, latch clearance, supported posts, and room above changing grade. Everyday access for bins, pets, lawn equipment, and people may point to a different opening than occasional wider access.

The posts beside a gate carry repeated movement. Their placement and support should be part of the fence plan, not a hardware decision made after the panels are built. The gate and selected fence repair guide explains when a dragging gate may reflect post movement or broader alignment problems.

Choose the fence around the job it must do

Privacy, appearance, airflow, pet containment, and an open sightline can lead to different layouts. Vertical and horizontal cedar use the same general site questions but create different board, rail, and transition details. A metal-post option changes the ground-line structure while keeping a wood-board appearance available.

Use the residential fence service for the full installation and replacement scope. The privacy fence page focuses on screening, while the metal-post fence page explains that post-system decision.

Prepare a Seattle fence estimate request

Send information that shows the complete route:

  • The Seattle address or ZIP code and the purpose of the fence
  • Wide photos of the full line, both ends, corners, and grade changes
  • The intended height, board direction, post preference, and gate needs
  • Photos of sidewalks, alleys, driveways, retaining walls, utilities, and landscaping
  • Any available survey, plat, easement, HOA rule, or earlier permit record
  • Whether the scope includes removal, disposal, repair, or full replacement

Public utility locating and private-line information are separate responsibilities. Irrigation, private lighting, drainage, and other owner-installed lines may not appear in public records. The written scope should state who provides available property and utility information.

A Cascadia privacy-fence example

The project image on this page is Cascadia work. Its location is not published, and it is not presented as a Seattle installation. The related cedar privacy fence collection can help a homeowner discuss screening, board direction, top lines, and transitions beside landscaping.

The example shows the service, not a Seattle address, permit, customer, price, or completion date. Those details are not assigned when the project record does not confirm them.

Seattle fence questions

Can I build an 8-foot fence without a permit?

Do not treat the permit exemption as the allowed height everywhere. SDCI publishes separate zoning limits for residential areas, setbacks, slopes, retaining walls, and special site conditions.

Who confirms the property line?

A contractor estimate can describe a proposed line but does not establish a legal boundary. Use reliable records and obtain surveying or legal help when the line is uncertain or disputed.

Can Cascadia remove the old fence?

Yes. Fence replacement is within Cascadia’s approved services. The estimate should identify the sections removed, debris handling, access, and any part that remains.

Cascadia Deck & Fence LLC is a Washington contractor, registration CASCADF741LJ, and is licensed, bonded, and insured. Free estimates are available. Workmanship warranty options up to four years are available with select packages and must be written into the agreement.

Read the regional permit research guide, then request a free Seattle fence estimate with photos of the full line, grade, and gates.

Reviews & project updates

Check our work. Stay connected.

Already worked with Cascadia?Your feedback helps local homeowners make a confident choice.
Leave a Google Review
Ready to discuss the project?

Request a free deck or fence estimate.

Call Free Estimate